Cover Films

Soft-PVC peeling cover film

• self-adhesive with one or two tabs
• low-cost film for polystyrene plates
• can be removed without any residues
• minimum application temperature: + 5
• temperature resistant from – 20 °C to + 70 °C
• store in dry rooms at room temperature

Piercing-foil with cavity circle 96-well

• each cavity is marked by a circle and a numerical printing
• prepierced in each cavity optimizes opening by tip
• self-closing film reduces the risk of cross-contamination
• also for use with micro-racks and critical PCR plates
• temperature resistant from – 80 °C to + 30 °C
• DMSO-resistant

Gas permeable peeling film

• liquid tight
• high permeability
• temperature resistant from – 5 °C to + 60 °C
• store in dry rooms at room temperature (approx. 20°C-23°C)

Polypropylene peeling cover film

• suitable for Real-Time-PCR
• self-adhesive with one or two tabs
• can be removed without any residues and repeatedly used
• for all plate types; PS, PP, PC, PE, DMSO-resistant
• temperature resistant from – 80 °C to + 120 °C
• store in dry rooms at room temperature (approx. 20°C-23°C)

Aluminium universal cover film, 30 μm

• material thickness: 30 μm
• can be easily removed
• ideal for piercing
• for all plate types; PS, PP, PC, PE
• temperature resistant from – 80 °C to + 120 °C
• store in dry rooms at room temperature (approx. 20°C-23°C)

Aluminium universal cover film, 60 μm

• material thickness: 60 μm
• with tear-off tab
• good pierceability
• for all plate types; PS, PP, PC, PE
• temperature resistant from – 80 °C to + 120 °C
• store in dry rooms at room temperature (approx. 20°C-23°C)

Aluminium Gold cover film

• with tear-off tab
• self-adhesive with high adhesive strength
• high solvent resistance
• not pierceable
• for manual use
• temperature resistant from – 80 °C to + 120 °C

Heat Sealing film, Aluminium, 30 μm

• material thickness: 30 μm
• good pierceability
• the numbers A1 indicate the top side of the foil
• sealing parameters: 160 – 180°C, 2-3 seconds
• temperature resistant from – 80 °C to + 120 °C
• DMSO-resistant
• for plate types: PS, PP

Heat Sealing film, Aluminium, 50 μm

• material thickness: 50 μm
• good pierceability
• the numbers A1 indicate the top side of the foil
• sealing parameters: 160 – 180°C, 2-3 seconds
• temperature resistant from – 20 °C to + 140 °C
• DMSO-resistant
• for plate types: PS, PP

Heat Sealing film, Polyester, 50 μm

• material thickness: 50 μm
• optically clear, peelable
• the numbers A1 indicate the top side of the foil
• sealing parameters: 160 – 185°C, 2-3 seconds
• temperature resistant from – 80 °C to + 140 °C